







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Metal Roofing in Lakewood, CA: What It Costs and How Long It Takes
Metal roofing in Lakewood, CA typically runs $15,000 – $40,000 installed, and most homes are done in 3 to 6 days once the material is on site. You’re replacing a roof that was framed for a 1950s tract house, so the work is really about preparing 70-year-old sheathing and framing for a roof that will outlast the house. Call (888) 255-8179 for a free on-site estimate before you commit to anything.
How a Metal Roof Goes On: The Stage-by-Stage Sequence

We don’t hand you a start date and disappear. Here’s the actual order of work, what happens when, and what you’ll be asked to decide along the way.
Day 1 – tear-off and deck inspection. The old shingles or tile come off, and this is where a Lakewood roof usually tells the truth about itself. On 1950s tract homes we regularly find soft spots in the original plank sheathing and rusted-through fasteners near the eaves. We photograph everything and show you before any repair gets added.
Day 2 – deck repair and underlayment. Damaged sheathing gets replaced, then a synthetic underlayment goes down over the whole deck. On coastal-influenced roofs we add a self-adhering ice-and-water membrane at the valleys and penetrations where wind-driven rain finds gaps. This is a half to full day depending on how much deck repair is needed.
Day 3 – trim, flashing, and panel layout. Eave trim, rake trim, and valley flashing go in first, then we chalk lines and set the first panel true to the ridge. You’ll have already picked your panel profile and color by now – that decision needs to happen at the estimate, not the morning of install, because panels are cut to order.
Days 4 – 5 – panel install and closures. Panels go down across the field, then ridge caps, end closures, and pipe boots. Exposed-fastener panels go faster; standing seam takes longer because every seam gets mechanically locked.
Day 6 – final inspection and cleanup. We walk the roof, check every penetration, run a magnet over the yard and driveway for stray fasteners, and hand you the paperwork. A permit inspection with the city typically follows within a few days.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Metal isn’t one product. What you pick changes both the price and how the roof behaves for the next 40 years.
- Exposed-fastener panels – The most economical route, usually the low end of our Lakewood range. Panels screw down through the face. The trade-off is the fasteners: they’re the first thing to need attention, and on a Lakewood roof they should be corrosion-rated screws with neoprene washers, not standard hardware.
- Standing seam – Concealed fasteners, cleaner lines, and the longest service life. It costs more because installation is slower and the panels are formed to exact lengths. The honest trade-off is that it’s the wrong choice if your budget is already stretched by deck repair.
- Stone-coated steel – This is the option most Lakewood homeowners gravitate to, because the textured profile echoes the low-pitch look of the original tract roofs without changing the uniform mid-century street face. Costs sit in the middle. Sherwin-Williams and similar coatings hold color well in our sun.
- Panel gauge and finish – A thicker gauge handles Santa Ana wind uplift better, and a factory finish (Kynar-type, not field paint) is what keeps the color from chalking. Coastal salt air and inland heat both punish a cheap finish.
What Metal Roofing Costs in Lakewood, CA

Metal roof installation in Lakewood runs $15,000 – $40,000. Our written estimates break the number into line items so you can see exactly what you’re paying for.
| Line item | Typical range |
|---|---|
| Full metal roof installation | $15,000 – $40,000 |
| Roof replacement (architectural shingle, for comparison) | $8,000 – $20,000 |
| Roof repair | $400 – $1,800 |
Four things push a job toward the high end. Size and pitch: a hip roof with multiple planes takes more cut panels and waste than a simple gable. Deck condition: 1950s sheathing that needs replacement adds material and a day of labor. Panel type: standing seam costs more than exposed fastener. Permit scope: if the deck has to be re-sheathed to current code, the inspection and material costs climb with it.
Your written estimate includes tear-off, deck repair up to a stated allowance, underlayment, trim, flashing, panels, and haul-off. What it won’t include unless we find it: hidden framing rot, and any structural correction the city requires once the inspector sees the open deck. We flag those before they happen, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Lakewood Homes Specifically Do to This Job
Nearly every home we roof in Lakewood is a 1950s single-story tract house – stucco over wood frame, slab-on-grade, attached garage. That build era changes the job. Original roof framing was sized for lightweight shingles or clay tile, so part of the planning is confirming the framing can carry a metal roof system, especially on the older 2×4 configurations.
The climate shapes it too. Santa Ana wind events stress fasteners and ridge caps, and the marine layer keeps moisture cycling through stucco and old decking. That’s why we spec corrosion-rated screws and heavier gauges here rather than what works inland. If you’re already planning the exterior as a whole, this pairs naturally with our Roofing work across the Lakewood service area – metal roofing is one trade of several we run for a home of this age.
Serving Lakewood, CA – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Metal Roofing in Lakewood

Most Lakewood metal roofs take 3 to 6 days of on-site work, plus a permit inspection a few days after. Deck repair can add a day or two. Call (888) 255-8179 for an exact timeline after we see the roof.
Yes – a roof replacement in Lakewood requires a permit and an inspection, and we pull it for you. Replacing existing roofing with a different material triggers the inspection that confirms the deck and framing meet current code. We handle the paperwork.
Sometimes, but we recommend tear-off in most Lakewood jobs. Layering hides deck rot and rusted fasteners, and on 1950s tract homes that’s where the real problems live. We’ll tell you which applies after inspection.
Installed, metal roofing in Lakewood runs $15,000 – $40,000 depending on size, panel type, and deck condition. Call (888) 255-8179 for a free exact quote with line-item pricing.
Our workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s on top of the manufacturer’s material warranty, which varies by panel and finish.
Get Your Free Metal Roofing Estimate in Lakewood
Call (888) 255-8179 and a live person answers, day or night. We’ll schedule a free on-site visit, measure the roof, inspect the deck, and hand you a written line-item estimate in the $15,000 – $40,000 range with no surprise add-ons. If you’re pairing this with Window Replacement in Lakewood or Impact Windows & Doors in Lakewood, we can fold the scope into one estimate. Book it – the number you see is the number you pay.
Written by the team at Groundwork Construction Co.












