







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Patios, Walkways & Pool Decks in Bellflower, CA: What to Expect
Patios, walkways & pool decks in Bellflower usually run $3,500 – $11,000 for a paver patio, with most single-story backyard projects finished in 5 to 10 working days once we start. Walkways and pool surrounds are priced by square footage plus the demolition and base work underneath. Call (888) 255-8179 and we’ll walk the yard with you and put real numbers on paper.
How We Build a Patio, Walkway or Pool Deck, Step by Step

Every project follows the same sequence. Skipping a stage is how pavers sink two winters later.
Stage 1, layout and demolition (day 1). We mark the finished shape with stakes and string so you can see the footprint before we cut anything. Then we break out old concrete, remove grass and roots, and haul it off. You confirm the final layout on this day. Changes after the base goes in cost real money.
Stage 2, excavation and base (days 2 and 3). This is the stage nobody sees and every failure traces back to. We dig down 6 to 8 inches, compact the subgrade, then lay and compact the aggregate base in lifts. For a pool deck we build in a slight slope away from the coping so splash water doesn’t pool at the house.
Stage 3, edging and drainage (day 3 or 4). We set edge restraint and run any drain line or channel to a legal discharge point. On Bellflower‘s tight lots that often means routing water toward the alley or the front parkway instead of a neighbor’s fence line. You decide where the water goes.
Stage 4, setting the surface (days 4 through 7, depending on square footage). Pavers get laid in the pattern you picked, cut tight against the house, planters and pool coping. Concrete and stone get formed and placed on their own timeline. We check slope one more time before finishing.
Stage 5, finish and cleanup (day 7 to 10). We sweep in polymeric sand, compact, clean the cut edges and walk the finished surface with you. That walkthrough is also where we hand over the written workmanship coverage and explain how to keep the surface looking right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Most homeowners land on one of four surface types. The honest trade-offs matter more than a catalog photo.
- Concrete pavers. The most common choice for patios and walkways here. $3,500 – $11,000 for a typical patio. Belvidera-style sets from Belgard hold up well under sun and are easy to lift and reset if a line settles. Higher upfront cost than poured concrete.
- Poured concrete with a decorative finish. Lower cost per square foot and fast to place. Cracking is a real risk on Bellflower’s shrink-swell clay, so we cut control joints on purpose and warn you it’s a concrete fact of life.
- Natural stone. Travertine and slate for pool surrounds look best of anything on this list and stay cooler underfoot in the dry inland heat. Priciest option, and some stones need sealing every few years.
- Gravel or decomposed granite. Cheapest walkway material and fine for garden paths. It migrates, weeds creep in, and it’s a poor match for a pool deck.
You’ll also pick pattern, color, and whether we add a seat wall, planter caps or a step-down to the lawn. We quote these as line items so you can add or drop them before signing.
What Patios, Walkways & Pool Decks Cost in Bellflower, CA

A paver patio in Bellflower typically runs $3,500 – $11,000. That’s the range for the surface, base and standard edging. Pool deck resurfacing and long walkway runs push toward the upper figure. Five variables move the number.
- Square footage. A 200 sq ft patio and a 600 sq ft one aren’t the same job. Base prep, sand and labor scale with area.
- What’s underneath. Removing old concrete adds demo and hauling cost. Discovering a non-permitted slab or an old footing adds more.
- Drainage. Flat lots with nowhere for water to go need channel drains or a dry well. That’s real scope.
- Material grade. Concrete pavers sit below natural stone. Travertine on a pool surround is the top of the range.
- Add-ons. Seat walls, steps, planter columns and built-in lighting are line items, not free.
A written estimate from us itemizes demolition, base, material, edging, drainage and any structures. It does not include permits, gas or electrical work for an outdoor kitchen, or planting beds we don’t touch. Ask before you sign, every time.
See the difference
Before
After
Before
After
Before
AfterWhat Bellflower Homes Specifically Do to This Job
Bellflower is built out. Almost every patio and walkway job here is a remodel over a post-WWII slab, not new ground. That changes the work. Many 1940s – 1960s single-story stucco homes on the older blocks around Rose and Downey avenues were graded with the lot sloping to the alley, and the existing patios were poured shallow, sometimes 2 inches thin. When we demo one of those, we find it. That’s why our base budget assumes full removal and rebuild rather than a resurfacing overlay.
The dry, hot inland summers bake concrete and seal out the color. The occasional wet winter finds every crack, and sun-cracked slabs let water sit against the slab edge and the house stem wall. Driveway & Pavers jobs up front face the same sun, so homeowners often pair this with our Driveway & Pavers work. The lots are tight, so a pool deck or walkway has to be laid out around the sewer cleanout and the gas meter. When we pull a permit for a covered patio or a steel shade structure, the city plan checker looks at setbacks and lot coverage on those shallow lots. If the work is part of a full Driveway & Pavers in Bellflower front-to-back plan, we sequence the hardscape together so the base is prep’d once.
Serving Bellflower, CA – Our Local Coverage Area
We serve Bellflower and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Patios, Walkways & Pool Decks in Bellflower

Most single patio or walkway projects take 5 to 10 working days from demo to final sweep. A pool deck resurface runs a little longer because coping and drainage add stages. Call (888) 255-8179 to get a framework for your specific lot.
An uncovered patio slab at grade typically doesn’t need a permit, but a covered patio, a shade structure, or anything over a certain height does. We tell you in writing which scope needs one before we start, and we pull it for you.
Sometimes, if the slab is sound and there’s enough room for the base and paver thickness under your door thresholds. Most Bellflower slabs we open are too cracked or thin, and we won’t put pavers over a base we don’t trust. We check before we quote.
Pool surrounds typically land in the $3,500 – $11,000 range depending on square footage and material. Travertine sits at the top, concrete pavers in the middle. Call (888) 255-8179 for an exact quote after we measure.
Our 730-Day Done Right Promise covers workmanship on every patio, walkway and pool deck we build. If it settles or fails, we come back and make it right.
Get a Free Estimate for Patios, Walkways & Pool Decks in Bellflower
Call (888) 255-8179 for a free on-site estimate on your Bellflower patio, walkway or pool deck. We’ll measure the footprint, check the existing base and give you an itemized price with no surprises. If you’re also planning a backyard unit, homeowners often pair this with ADU Site Prep & Utilities in Bellflower, and our team can coordinate the hardscape with it.
Written by the team at Groundwork Construction Co.












