







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Artesia, CA: What the Job Really Takes
A paver driveway in Artesia typically runs $7,000 to $18,000 installed, and most jobs are finished in three to six working days once materials land on site. The work is base-heavy: excavation, compacted aggregate, a plate-compacted bedding layer, then the pavers themselves with polymeric sand in the joints. Call (888) 255-8179 to schedule a free on-site estimate for paver driveways in Artesia.
How We Build a Paver Driveway in Artesia, Stage by Stage

Paver driveways live or die on what’s underneath them. Here’s what actually happens, in order, and where you’ll be asked to make a decision.
Stage 1: Site walk and layout (day 1, about 2 hours)
We measure the existing drive, check the slope away from the garage, and look for what’s under the surface. In Artesia, that’s often a cracked older slab or a 1950s – 60s pour over questionable subgrade. You’ll confirm the finished width and whether we’re tying into an existing apron or replacing it. We flag any drainage problem now, not after the pavers go down.
Stage 2: Demo and haul-off (day 1 – 2, one to two days)
Old concrete or asphalt comes out and goes to the dumpster. On a standard 20-by-20-foot drive, that’s one to two days with a breaker and a skid steer. If the drive sits over an old citrus root system or a buried utility run, we stop and mark it before cutting. You don’t need to be home for this stage.
Stage 3: Base and compaction (day 2 – 3, one to two days)
We excavate 6 to 10 inches depending on the load, lay class II base rock, and compact in lifts. This is the stage that decides whether your pavers still sit flat in ten years. Base depth, drainage pitch, and compaction passes are the three things we don’t shortcut, and they’re why the price on a driveway differs from a patio.
Stage 4: Setting bed, pavers, and cuts (day 3 – 5, two to three days)
One inch of bedding sand goes down, screeded flat. Then the pavers go in, laid to your chosen pattern, with field cuts at the edges and around the apron. You’ll pick the pattern and paver before we order, and you’ll want to see the dry-lay. This is the moment to change your mind about the color, not after the sand goes in.
Stage 5: Edge restraint, polymeric sand, cleanup (day 5 – 6, about half a day)
Edge restraint gets pinned around the perimeter, polymeric sand goes into the joints, and we mist it in. We sweep, hose down, and walk the finished drive with you. You can drive on it within 24 to 48 hours depending on the weather.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Paver Driveways
Most of your decisions on a paver driveway happen before we order materials. Here’s how the real choices stack up.
- Concrete pavers, standard grade: the workhorse for driveways. Techo-Bloc and Cambridge Pavers both make solid 60mm and 80mm units. The 80mm is what we recommend for driveways that see a heavy truck or an RV, since it handles load better than the 60mm patio product.
- Concrete pavers, premium finish: tumbled or textured faces that hide tire marks and look less new out of the gate. Adds roughly 15 to 25 percent to the material line. Good fit for homes on a street where curb appeal carries weight.
- Clay brick pavers: warmer look, higher cost, and honestly a thinner install base in Southern California. If you want brick, we’ll quote it, but know the material lead time runs longer than concrete.
- Paver pattern: running bond is the cheapest to lay and the fastest. Herringbone and basketweave cost more in labor and cuts, but they lock together better under turning tires. On a tight lot where the drive is nearly the full width of the property line, the pattern is what you actually see.
- Joint sand: polymeric sand for the whole drive. Quikrete and similar brands hold up in the winter rain bursts. Skip the cheap stuff; it washes out and you’ll be re-sanding within two seasons.
- Drainage: a small channel drain or a French drain off the low corner. On an Artesia lot with a flat drive and a garage at the bottom, this isn’t optional if you want to keep water out of the garage.
What Paver Driveways Cost in Artesia, CA

A standard two-car paver driveway in Artesia lands between $7,000 and $18,000, with most jobs in the $9,000 to $13,000 band. That’s the honest range, and here’s what pushes a job toward either end.
- Square footage: the single biggest lever. A short single-car drive is a few hundred square feet; a full two-car with an apron can double that. Material and base both scale with area.
- Existing surface: demo of a thick old slab or a drive with a failed subgrade adds to the total. So does hauling off rubble, since dump fees hit every job.
- Paver grade and pattern: standard 60mm in running bond is the low end. 80mm in herringbone with a premium finish is the high end.
- Drainage: a channel drain or regrading the drive away from the garage adds cost, but it’s the difference between a driveway that survives ten winters and one that puddles at the apron.
- Permitting scope: Artesia’s plan-check reviews are strict, so if the drive changes the impervious surface area or the street apron, expect a permit and inspection line item.
A written estimate from us breaks out demo, base, pavers, sand, drainage, and permit line by line. The number you see is the number you pay, with no change orders unless you change the scope. Call (888) 255-8179 for your free on-site estimate.
See the difference
Before
After
Before
After
Before
AfterWhat Artesia Homes Specifically Do to a Paver Driveway
Artesia is a dense city of 1950s and 1960s single-story tract homes on small parcels, and that history sits right under your driveway. Many parcels have later additions or enclosed patios, and some of them were never permitted. When we walk a paver driveway job here, we’re often looking at a drive that was widened over the years, poured over a subgrade nobody tested, and tied into an apron that’s out of level with the street. That’s the failure we fix most: water pooling at the garage door because the old slope died somewhere in the 1990s. The city’s permitting office is known for strict plan-check reviews, so if your drive changes impervious surface or apron geometry, we pull the permit and work through the review with the city rather than letting the homeowner chase it. Artesia’s mild climate is kind to pavers, but winter rain bursts are not, and older homes on flat drives with poor drainage are where we see garage water intrusion most. That’s a fix we do at the base stage of every paver driveway, not a separate project. If your project also touches patios or walkways, our Driveway & Pavers service covers the whole exterior hardscape, or you can see the full scope on our Driveway & Pavers in Artesia page. We work throughout Artesia and neighboring areas including Cerritos, Hawaiian Gardens, Norwalk, and Bellflower, and we tie in well with homeowners planning a Garage Conversion ADU in Artesia or an ADU Design & Permitting in Artesia, since a converted garage usually changes how the drive needs to drain.
Serving Artesia, CA – Our Local Coverage Area
We serve Artesia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Artesia

Most paver driveways in Artesia take three to six working days from demo to cleanup. A small single-car drive can be done in three, while a full two-car with drainage corrections runs closer to a week. Rain days in winter can push the schedule, especially after the polymeric sand stage. Call (888) 255-8179 for a timeline based on your specific drive.
Often yes, especially if your project changes impervious surface area, the width of the drive, or the street apron. Artesia’s plan-check reviews are strict, so we handle the permit application and inspection scheduling for you. If your job doesn’t trip a permit threshold, we’ll tell you in the written estimate. Call (888) 255-8179 to find out where your drive stands.
Yes, in most cases. A paver driveway is a site and surface job, so the garage slab and structure usually stay untouched. The exception is when the drive slope is failing and water is reaching the garage door; then we’d recommend regrading the base and possibly a channel drain. That’s still exterior work. Call (888) 255-8179 to walk it through.
A premium paver driveway with drainage corrections typically runs $12,000 to $18,000 in Artesia, depending on square footage and the paver grade you pick. Standard pavers without drainage work land closer to the $7,000 to $10,000 range. Every estimate is line-itemed, so you see what each piece costs. Call (888) 255-8179 for an exact quote, and estimates are free.
Every paver driveway we install is backed by the 730-Day Done Right Promise, which means if the work isn’t right, we make it right, up to two years after the project. Paver failures that come from bad base or bad setting are on us during that window. Material warranties from Techo-Bloc, Cambridge Pavers, and similar brands run separately. Call (888) 255-8179 for the full warranty terms in writing.
Schedule Your Free Paver Driveway Estimate in Artesia
Call (888) 255-8179 for a free on-site estimate on paver driveways in Artesia. On the call, we’ll ask about the size of your drive, the current surface, and any water problems you’ve noticed at the garage door. We’ll set a time for a walkthrough, and you’ll get a written line-item price with materials, labor, drainage, and permits spelled out. No surprises, no change orders, no pressure. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co.












