







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Artesia, CA: What the Job Actually Costs and How Long It Takes
Cabinets & Countertops in Artesia typically run $14,000 – $45,000 for a full replacement of both, with cabinets installed in 2 – 4 days and counters templated and set about 7 – 14 days after that. Most of our Artesia jobs are 1950s – 1960s tract homes where the original boxes have swollen or the layout wastes a wall. Call (888) 255-8179 for a free on-site estimate before you pick a door style.
How We Run a Cabinet and Countertop Job, Start to Finish

Every Artesia job follows the same five-stage sequence. Knowing what happens on day one versus day nine keeps you from making a decision you can’t undo.
Stage 1: Walkthrough and field measure (day 1)
We measure every wall for out-of-square conditions, because a 60-year-old Artesia tract home rarely has a straight run. This is also where we check for the older problems: water damage under the sink, unpermitted electrical behind the old boxes, and gaps that mean the new cabinet line needs filler panels. You decide door style, finish and box construction at this visit, not later.
Stage 2: Written quote and deposit
You get a line-item quote: cabinet boxes, doors, hardware, countertop material, edge profile, sink cutout, and the install labor separate from the material. If your Artesia job runs over $10,000, the $1,000 discount and 0% financing for 18 months both apply. You approve the layout drawing before anything is ordered.
Stage 3: Demo and prep (1 – 2 days)
Old cabinets come out, drywall gets patched, and we correct what we find. In older Artesia homes that often means shoring a soft subfloor near the sink or relocating a receptacle that was buried behind the old cabinet run. You’ll have a stripped kitchen for this window, so plan meals around it.
Stage 4: Cabinet install (2 – 4 days)
Base cabinets go in first and get shimmed and scribed to the walls, then uppers and the crown. Doors and drawers go on last because they get damaged in tight work. You’ll choose hardware pulls at this stage if you haven’t already; a full drawer of options is in stage 5’s notes below.
Stage 5: Template, fabricate, install counters (7 – 14 days)
Stone counters get templated only after the cabinets are set and level. Fabrication takes a week to two weeks depending on material, then the slab is set and the sink and faucet go in the same visit. You get a plumb, level, sealed countertop and backsplash start point, and if the wider scope is part of a full Kitchen Remodeling in Artesia, the schedule nests into that project instead.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
For most Artesia kitchens, the decision tree is smaller than the showroom suggests. Here’s what genuinely differs in cost and in how it holds up.
- Cabinet boxes – stock vs. semi-custom vs. full custom. Stock sells in fixed sizes and saves money but wastes wall space in irregular rooms. Semi-custom adjusts widths by inches and hits most older Artesia homes, including a KraftMaid line we install. Full custom costs roughly double and suits a kitchen you’ll keep for decades.
- Door material – painted MDF vs. solid wood vs. thermofoil. Painted MDF gives the cleanest finish and takes repainting well; solid wood handles dents better and costs more; thermofoil is the economical pick but peels at the edges in humid kitchens over time.
- Counter surface – quartz vs. granite vs. butcher block vs. laminate. Quartz is uniform, non-porous and needs no sealing; granite is unique per slab but requires annual sealer; butcher block softens the look and can be sanded back, but wants oiling; laminate stays the budget choice for a rental or flip.
- Sink and faucet. An undermount sink means the cutout must be templated into stone, so it’s a decision before fabrication, not after. A Blanco or Kohler undermount with a Moen or Delta pull-down faucet runs about $400 – $1,200 in fixtures.
- Hardware and drawer glides. Soft-close and full-extension slides add $150 – $400 across a full kitchen and are worth every dollar in daily use; cheap slides are the first thing to fail.
What Cabinets & Countertops Costs in Artesia, CA

The full replacement in Artesia lands between $14,000 and $45,000. Cabinets alone run $4,000 – $13,000; countertops alone $2,000 – $6,500. What pushes a job toward the high end comes down to five variables:
- Kitchen size and wall count. A galley kitchen on a small parcel lands near $14,000; an L-shaped layout with an island lands near the top.
- Material grade. Laminate plus stock boxes is the low end; quartz plus semi-custom is the middle; a full slab of stone and custom millwork is the ceiling.
- Layout changes. Moving the sink, adding a range hood vent, or relocating a receptacle adds electrical and plumbing work, which no cabinets-and-counters line item covers.
- Existing condition. Unpermitted wiring or a soft subfloor found after demo can add $500 – $3,000 before the new boxes go in.
- Permit scope. A straight replacement of like-for-like cabinets usually needs no permit; moving a wall or a gas line does, and Artesia’s plan check wants the paperwork right.
A written estimate covers cabinets, countertops, install labor, sink cutout, hardware and haul-away. It does not cover electrical relocations, plumbing moves, backsplash installation, or any structural change; those get quoted line by line once we’ve walked the room. No-hassle upfront pricing means the number you see is the number you pay, with no change orders once work starts. Tap into our team’s up to 12 years of experience on jobs like this, and the 730-Day Done Right Promise backs the work from the day it’s finished.
See the difference
Before
After
Before
After
Before
AfterWhat Artesia Homes Specifically Do to This Job
Artesia is a small, dense city of post-war tract homes on tight parcels in ZIP codes 90702 and 90701, so a cabinet job here starts with a retrofit rather than a blank slate. Many homes were built in the 1950s – 1960s and have later additions, enclosed patios, and the occasional unpermitted garage conversion from decades past; any pre-construction walkthrough in Artesia can turn up phantom square footage that changes the structural and title picture before we order a single box.
The city’s permitting office runs strict plan-check reviews, which matters here because a cabinet replacement that turns into moving a gas line or adding an outlet needs an inspection. We’re fluent in reconciling unpermitted work with current code before a kitchen job can proceed. Older homes also mean pre-1978 lead-safe handling whenever we cut into painted cabinets or wall material, and our crews follow that protocol on every Artesia job.
The mild, mostly dry Los Angeles basin climate helps cabinets hold up, but winter rain bursts occasionally find their way into older drainage and flat patio roofs, which is why the under-sink cabinet and the wall behind it are the first things we inspect for swelling. If you’re weighing a full kitchen plan, our Kitchen Remodeling service covers the scope; for daily work in Artesia, this is the specialized job. Homeowners often pair this with a Walk-In Showers & Shower Remodeling in Artesia or a Tub-to-Shower Conversion in Artesia when they’re updating the whole home at once.
Serving Artesia, CA – Our Local Coverage Area
We serve Artesia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Artesia

Plan on about three to four weeks from demo to finished countertops: two to four days for cabinet install, then seven to fourteen days for stone fabrication and install. A laminate top on stock cabinets can finish in about a week. Call (888) 255-8179 for an exact schedule on your Artesia home.
Not for a straight like-for-like replacement. You do need one if the job moves a gas line, adds an outlet circuit, or changes a wall – which is common in older Artesia homes where the original layout no longer works. Our team pulls the permit and passes inspection. Call for a walkthrough so we can tell you which category your job falls into.
Yes, and it’s the most common scope. The trick is matching new cabinet widths to the existing sink and range positions so no plumbing or structure moves. If the sink must shift, that’s a plumbing line item quoted separately. Call (888) 255-8179 for a written quote that spells out both scenarios.
Between $14,000 and $45,000 for a full replacement, with cabinets at $4,000 – $13,000 and countertops at $2,000 – $6,500 on their own. Material grade and kitchen size drive the spread more than anything else. Call (888) 255-8179 for a free estimate; we’ll give you line-item pricing, the $1,000 off if you’re over $10,000, and 0% financing for 18 months.
Every job at all seven of our services is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Call (888) 255-8179 for a free estimate and to see it in writing.
Get a Free Cabinets & Countertops Estimate in Artesia
Call (888) 255-8179 to schedule a free on-site estimate for cabinets and countertops in Artesia. A live person answers around the clock, and on the visit we’ll measure the room, flag anything that adds cost, and hand you a written line-item quote. No-hassle upfront pricing, $1,000 off projects over $10,000, and 0% financing for 18 months. Let’s start with a number you can plan around.
Written by the team at Groundwork Construction Co.












