







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What Window Installation in Lakewood, CA Actually Involves
Window installation in Lakewood, CA runs $4,500 – $15,000 for a whole-home replacement, and most tract homes here take two to four working days from demo to finished trim. The job means pulling the original single-pane units, checking the rough openings for rot and stucco damage, setting new frames plumb and square, then sealing and trimming to match the house. Call (888) 255-8179 to schedule a free estimate and we’ll walk the house with you.
How Our Window Installation Process Works, Stage by Stage

Window work on Lakewood’s older homes is a measured, staged job. Here’s exactly what happens, when, and what you decide along the way.
Stage 1: Walkthrough and measurements (day 0, about 90 minutes)
We measure every opening, check the stucco and framing around each unit, and note which windows are original and which have been swapped over the years. You decide which rooms get done now versus later, and whether you want like-for-like sizing or a change in style. This is where we confirm the rough-opening dimensions that drive everything else.
Stage 2: Product selection and ordering (days 1 – 10)
You pick frame material, glass package, and color. Lead times run about one to three weeks on standard vinyl or aluminum units and longer on custom sizes. You sign off on the final spec sheet and pay the deposit. Nothing gets ordered until you’ve seen the written line-item quote, so the number you see is the number you pay.
Stage 3: Prep and demo (day 1 of on-site work, half a day)
The crew lays drop cloths, removes interior trim and the old sashes, and cuts back any stucco that’s cracked or loose around the opening. On these 1950s tract houses we frequently find wood rot at the sill and header when the original single-pane glass has been leaking for years. Those repairs get handled before anything new goes in, and we show you what we found.
Stage 4: Setting and sealing (days 2 – 3)
New units go in plumb, level, and square, shimmed against the framing and fastened per manufacturer spec. We flash and seal the exterior with a proper weather barrier and sealant, then insulate the gap between frame and wall. This is the stage that determines whether the window is watertight for the next thirty years, so we don’t rush it.
Stage 5: Trim, finish, and walkthrough (last half day)
Interior trim goes back on, casing is caulked and nailed, and we clean up. You walk every window with us, open and close each one, and confirm the job. Any punch-list item gets handled before we leave. All of it is covered by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Window Options You’ll Choose Between
- Vinyl frames: The workhorse choice for Lakewood tract homes. Affordable, low-maintenance, decent insulation value. Not the stiffest option and colors are limited, but it’s the right answer for most 1,100 sq ft houses here.
- Aluminum frames: Slimmer profile, holds up well to heat, common in mid-century homes where a thin sightline matters. Aluminum conducts heat, so it needs a thermal break to perform well in the LA Basin.
- Fiberglass and composite: Stronger than vinyl and more dimensionally stable, which matters on houses that see big temperature swings. Higher cost, and not every style is available.
- Glass package: Double-pane low-E glass is the standard upgrade here. It cuts heat gain from Santa Ana wind days and reduces outside noise on busier streets. Brands like CGI, CWS, and ES Windows offer solid double-pane systems that suit this market.
- Style and configuration: Single-hung, slider, casement, or fixed. Matching the original 1950s proportions keeps the street face uniform, which most Lakewood homeowners care about.
If you’re changing the size or number of openings, that work becomes part of a full Windows & Doors in Lakewood scope and touches framing and stucco, so plan for it.
What Window Installation Costs in Lakewood, CA

Most window installation in Lakewood lands between $4,500 and $15,000 for a typical whole-home job. Here’s what pushes a project toward either end:
- Number and size of units: A three-bed, one-bath tract home has roughly eight to ten openings. Larger or picture windows cost more per unit.
- Existing condition: Rot at sills and headers, cracked stucco, or years of leaks add repair labor. This is the single biggest swing factor on 1950s housing.
- Frame and glass grade: Vinyl with standard double-pane sits at the low end; fiberglass or premium low-E sits higher.
- Retrofit versus new construction: Retrofit units fit inside the existing frame and cost less; full-frame replacement means cutting back stucco and rebuilding the opening.
- Permit and inspection scope: A straightforward replacement permit costs less than one that includes structural changes to an opening.
Your written estimate includes the units, labor, flashing, sealant, interior trim, cleanup, and permit. It doesn’t include hidden rot repair until we’ve opened the wall and can see it, and we quote that separately before doing the work. That’s upfront pricing, no surprises. Need a number? Our Windows & Doors team can quote it in one visit.
See the difference
Before
After
Before
After
Before
AfterWhat Lakewood Homes Specifically Do to This Job
Lakewood is one of America’s first planned post-WWII suburbs, built almost entirely between 1950 and 1955, and nearly all of the city’s 25,000-plus homes are still the original 1,100 sq ft, single-story, stucco-over-wood-frame tract house. That fact defines window work here. Those homes went up with single-pane windows in a stucco skin, and seventy years of marine-layer moisture cycling through that wall assembly means we regularly find soft framing at the sills when we pull a unit in the Mayfair Park and Lakewood Village areas. The hot, dry Santa Ana wind events also dry out old wood framing and stress the seals around exterior openings, so windows on the west and south faces fail first.
The upside of a uniform tract plan: because every house on the block shares the same slab and framing layout, a retrofit detail that works on one home almost always works on the next. We cover all of Lakewood, including the 90713 and 90712 ZIPs, and we’ve learned which vintages need extra flashing detail before we ever set a frame. Permits for replacement windows here go through the city’s building department with a standard plan check, and inspections are quick when the flashing and fastening are done right the first time.
If a window opening is part of a bigger exterior project, homeowners often pair this with a Wood Fence in Lakewood or a Chain Link Fence in Lakewood to finish the yard at the same time. You can see our full reach across Lakewood and plan accordingly.
Serving Lakewood, CA – Our Local Coverage Area
We serve Lakewood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Installation in Lakewood

A typical whole-home job takes two to four working days on site once the units arrive, plus the one-to-three-week lead time to order them. Larger homes or custom sizes run longer. Call (888) 255-8179 and we’ll give you a realistic schedule for your house.
Yes. Replacement windows in Lakewood require a permit and a final inspection, and we handle pulling it and passing the inspection for you. The city’s building department plan-checks the submittal, and inspections move quickly when the flashing and fastening are correct.
Yes, in most cases. Retrofit units fit inside the existing frame, so there’s no plumbing, electrical, or structural work involved. Only when you change an opening’s size or add windows does the scope grow into framing and stucco, and we’ll tell you upfront if that’s the case.
Whole-home window installation in Lakewood runs $4,500 – $15,000, depending on unit count, frame and glass grade, and how much rot or stucco repair the openings need. Call (888) 255-8179 for an exact quote – estimates are free.
Our workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Manufacturer warranties on the windows themselves run separately and depend on the brand and product line you choose.
Get a Free Window Installation Estimate in Lakewood
Planning window installation in Lakewood? Call (888) 255-8179 for a free on-site estimate. A live person answers around the clock, we measure every opening, and you get a written line-item quote before anything gets ordered. Our technicians bring up to 12 years of experience, and the work is backed in writing.
Written by the team at Groundwork Construction Co.












