







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in Downey, CA: What It Costs and How Long It Takes
Most tub-to-shower conversions in Downey run $3,500 to $10,000 and take 5 to 10 working days once permits clear. The job means pulling the tub and its surround, reframing or re-sheeting the wet wall as needed, setting a new shower pan and drain, then waterlining and tiling to match. Call (888) 255-8179 for a free on-site estimate; the pricing is written line by line and the number doesn’t move once work starts.
How the Work Actually Runs, Stage by Stage

Here’s the real sequence, not a brochure version of it. Each stage below is what happens and what you decide.
- Stage 1: On-site measure and code check (day 0, about an hour). We measure the alcove, check the drain location, and look at what’s behind the existing wall. In Downey’s older tracts, we’re often opening a wall to find original galvanized supply lines or cast-iron drain stubs, and that changes the scope before we ever write the estimate. You decide the pan size and whether the shower gets a bench or niche at this point.
- Stage 2: Permit and demo (days 1 – 2). We pull the permit and remove the tub, surround, and any failing backer. Demo of a standard 5-foot alcove takes a day. You don’t decide anything here except where the new shower valve goes, and that has to be locked before the rough-in.
- Stage 3: Rough-in plumbing and inspection (days 2 – 4). New drain, new valve body, and any re-routing around the old lines. The city inspector signs off on the rough-in before anything gets closed up. This is the stage most homeowners don’t anticipate, and it’s why a “weekend project” quote is usually a red flag.
- Stage 4: Waterproofing and tile (days 4 – 7). Cement backer, a bonded waterproof membrane, then tile. This is where the budget really lives: a $3,500 job uses a stocked ceramic and a basic pan; a $9,000-plus job gets a custom tile pan, a bench, and a niche. You pick the material during the stage-1 visit so it’s not a mid-job surprise.
- Stage 5: Glass, trim, and final inspection (days 7 – 10). Glass panel or door set, new fixtures, caulk, and the final inspection. You walk it with us, and anything that doesn’t pass your eye gets fixed before we call it done.
Most of our Downey tub-to-shower conversions close out inside two weeks of the demo date. The variance is old-house surprises, not our schedule.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Spec Choices That Actually Change the Job
Forget the glossy catalogs. Here are the real forks in the road.
- Prefab pan versus custom tile pan. A prefab acrylic or fiberglass pan is faster, cheaper, and genuinely durable, but it limits you to stock sizes. A custom tile pan lets the shower fit the alcove exactly and looks better, but it adds labor and a longer cure time. For a small 1940s Downey bath, the custom pan is usually the only way to avoid dead space at the ends.
- Tile grade. Ceramic is the budget pick; porcelain holds up better to the hot, dry inland summers here and resists staining from hard water. Glass is the showpiece and the most forgiving to clean, but costs more per square foot and takes longer to set.
- Valve and trim. A basic pressure-balance valve is fine. A thermostatic valve costs more but holds temperature when someone flushes the other bathroom’s toilet, which matters in a single-story ranch where both baths share a stack.
- Glass panel versus curtain. A single fixed panel runs less than a full door set and lets you skip the track cleaning. Full glass doors with a factory finish stay clearer longer.
- Drain location. Keeping the drain where it is saves money. Moving it costs more because it means cutting the subfloor and re-routing, which is why we look at this in stage 1.
Our tile and glass suppliers sit in the same brand network we use across our bathroom remodeling service, so we can show you real samples, not just swatches.
What Tub-to-Shower Conversion Costs in Downey, CA

Expect $3,500 to $10,000, with most Downey jobs landing in the $5,000 – $8,000 band. Here’s a line-item view of what drives that:
| Line item | Typical range |
|---|---|
| Demo and haul-away of tub and surround | $400 – $900 |
| Rough plumbing and drain work | $800 – $2,200 |
| Waterproofing and backer | $600 – $1,500 |
| Tile and setting (alcove only) | $1,200 – $4,000 |
| Glass panel or door set | $500 – $1,800 |
| Permit and inspection | $200 – $600 |
The four variables that push a job low or high: size (a 60-inch alcove is the base case; anything wider adds framing and tile), existing condition (old galvanized supply lines or a failing pan add rough-in), material grade (ceramic versus porcelain versus glass), and permit scope (a drain relocation or valve upgrade triggers a fuller inspection). What’s included in our written estimate: materials, labor, permit, haul-away, and final inspection. What typically isn’t: a vanity or floor replacement outside the shower footprint, or anything structural we can’t see until the wall opens. If you’re widening the project into a full bath, that’s part of a full Bathroom Remodeling in Downey and we’ll scope both together.
See the difference
Before
After
Before
After
Before
AfterWhat Downey Homes Specifically Do to This Job
Downey is a built-out, post-WWII inner-ring suburb where nearly everything is remodel and addition on 1940s – 1960s ranch and Spanish-eclectic tract homes, not new construction. That age shows up in this exact job: behind the tub wall we regularly find original galvanized supply lines and cast-iron drain stubs, and shallow stem-wall or slab foundations that mean a drain relocation can’t be done the way it would in a newer house. Near Furman Park and the original 1950s tracts, the older drain material and tight lots mean we plan around inspection timing, not the other way around. The city’s plan-check and older-structure review process also shapes scope, and remodeling here is frequently about upgrading what’s already in the ground rather than adding new. Our teams know that reality on every Downey call, whether it’s a shower conversion or Metal Roofing in Downey on the same house.
Serving Downey, CA – Our Local Coverage Area
We serve Downey and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tub-to-Shower Conversion in Downey

Most take 5 to 10 working days once the permit clears. Demo and rough-in take two to three days, waterproofing and tile take three to four, and glass and final inspection close it out; the biggest wildcard is what we find behind the old wall.
Yes, in practically every case. A conversion touches the drain and valve, which counts as plumbing work, and Downey requires a permit and inspection for it. We pull it for you and handle the rough-in and final sign-off.
Often, yes. If the drain and valve can stay where they are and the alcove is a standard 60-inch size, the job stays close to the low end of the range. Moving the drain or widening the alcove adds scope, cost, and inspection time.
Most Downey jobs run $3,500 to $10,000, with a typical middle landing around $5,000 – $8,000. Exact price depends on size, existing plumbing condition, material grade, and permit scope. Call (888) 255-8179 for a free line-item quote.
Every conversion is backed by the 730-Day Done Right Promise: if it isn’t done right, we make it right. Calls are answered by a live person 24/7 and the technicians on the job are background-checked and arrive in uniform.
Get a Free Tub-to-Shower Conversion Estimate in Downey
Call (888) 255-8179 to schedule a free on-site estimate for your tub-to-shower conversion in Downey. On the call we’ll confirm your alcove size, ask about the existing plumbing, and set a visit. You’ll get a written, line-item quote with no change-order games, and the full scope covers our Downey service area. If the shower is one piece of a bigger refresh, we’ll scope it alongside Tile Roofing in Downey or any other work you’re considering.
Written by the team at Groundwork Construction Co.












