







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Pico Rivera, CA: What the Job Actually Involves
An aluminum fence in Pico Rivera usually runs $4,000 – $10,000, and most residential jobs are finished in two to four days once the panels and posts are on site. The work is a layout, post-setting, and panel-hanging sequence in powder-coated aluminum: setting galvanized posts in concrete, mounting rails and pickets, then hanging the gate and checking every latch. Timelines shift with footage, grade changes, and how many gates you want. Call (888) 255-8179 for a free on-site estimate before you commit to a number.
How We Build an Aluminum Fence: Post to Panel, Step by Step

Aluminum fencing looks simple from the sidewalk, and that’s the trap. The quality lives almost entirely in the post setting and the layout. Here’s the actual sequence, with the decisions you make and when you make them.
Stage 1: Site walk and layout (day 1, roughly 1 – 2 hours)
We walk the property line with you, confirm the corners, and mark the run with string and stakes. You decide the gate locations and swing direction here, because moving a gate later means resetting posts. We check for buried irrigation, gas, and electrical lines before anything gets dug, and confirm how the fence handles grade changes.
Stage 2: Excavation and post-hole prep (day 1, 2 – 4 hours)
We dig post holes to depth, typically 24 to 30 inches on a standard residential run, then set them backfilled with concrete. Time depends on soil and footage. On the older Pico Rivera lots we work, an abandoned sprinkler run or an old footing from a previous fence is common and adds time here, never a surprise we bill after the fact.
Stage 3: Post setting and cure (day 1, then overnight)
Posts go in level and plumb, set in concrete, and cure overnight. We check spacing run to run so panels don’t rack. You decide any decorative post caps or finials now, since they mount before the panels go on.
Stage 4: Panels, rails, and pickets (day 2, 3 – 6 hours)
Once posts are set, panels and rails go on fast. This is where the fence starts looking like a fence. We check every joint, tighten hardware, and confirm the finished height meets what you and any HOA agreed to.
Stage 5: Gates, latches, and walkthrough (day 2, 1 – 2 hours)
Gates get hung, latches adjusted, and self-closing hardware tested if you asked for it. We walk the whole run with you and fix anything on the spot. Most jobs wrap the same day panels go up; larger runs or steep grades add a third or fourth day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for an Aluminum Fence
Aluminum is not one product. The choices below move the price and the look more than anything else, so decide these before the estimate, not after.
- Picket style and spacing. A flat-top or spear-top picket, and whether pickets are spaced tight for privacy or open for visibility. Tight spacing costs more in material and labor but blocks sightlines; open spacing suits front-yard boundaries where you want the house visible.
- Height. Four-foot runs read as decorative boundary; five- and six-foot runs give real containment and cost noticeably more in panels and posts. Check HOA and local rules before choosing.
- Finish and color. Powder-coated black is the default and holds up well against sun and salt air. Bronze and architectural colors are available at a premium. Powder coat is what keeps aluminum from corroding, so don’t cheap out on it.
- Gate style and hardware. A standard walk gate versus a double drive gate, and whether you want self-closing hinges and a keyed latch. Hardware grade is where cheap installs fail first.
- Grade and slope handling. Racked panels follow a slope; stepped panels look cleaner on steeper yards. This is a design call and a labor variable.
On the material side, we work with proven powder-coated aluminum systems and set posts in Quikrete concrete for a stable, long-lasting footing. If your project also touches hardscape, homeowners often pair this with Driveway Repair & Replacement in Pico Rivera so the fence line and the driveway edge get finished together.
What an Aluminum Fence Costs in Pico Rivera, CA

Expect $4,000 – $10,000 for a residential aluminum fence in Pico Rivera. That range covers a typical side-and-back run with one gate. Here’s what moves a job toward the low or high end:
| Factor | Effect on price |
|---|---|
| Linear footage | More run, more posts, panels, and concrete |
| Height and picket spacing | Six-foot privacy spacing costs more than four-foot open |
| Number and type of gates | Each gate adds hardware and labor; double drive gates more |
| Site condition and grade | Slope, old footings, buried lines add prep time |
| Finish and color | Custom powder-coat colors carry a premium |
A written estimate lists footage, post count, gate hardware, finish, and disposal of the old fence as line items. What it doesn’t include unless stated: permits, HOA approval costs, and any concrete repair around posts. You get the number upfront, and the number you see is the number you pay. No change orders for work we should have scoped.
See the difference
Before
After
Before
After
Before
AfterWhat Pico Rivera Homes Specifically Do to This Job
Pico Rivera is a built-out, post-war suburb. Most of the single-family homes here went up in the 1950s and ’60s, so fencing work is almost always a replacement on an existing line, not a fresh install on open ground. That means old posts, old concrete, and property lines that have drifted over decades. On the gridded streets across ZIP codes 90660, 90661, and 90662, we regularly find fence lines that sit a few inches off where the plat says they should, so we check before we dig. The hot inland summers and dry Santa Ana winds are hard on older wood and vinyl, which is part of why aluminum holds up so well here: powder coat doesn’t fade and crack the way wood weathers. If your project runs into a full boundary rebuild, that’s part of a larger scope covered on our Fence Installation in Pico Rivera page. Older lots also mean buried irrigation and garden wiring at fence depth, so a locate before digging is standard, not optional.
We serve all of Pico Rivera and the surrounding streets, and our fence installation service covers everything from layout to the final latch check. If hardscape is in the plan, homeowners often pair this with Patios, Walkways & Pool Decks in Pico Rivera so the yard comes together in one pass. All work is covered by our 730-Day Done Right Promise.
Serving Pico Rivera, CA – Our Local Coverage Area
We serve Pico Rivera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Aluminum Fence in Pico Rivera

Most residential aluminum fences take two to four days from layout to final walkthrough. Post setting and concrete cure account for the first day; panels and gates follow. Larger runs or steep grades add a day or two. Call (888) 255-8179 and we’ll give you a realistic schedule for your footage.
It depends on height and location, so we confirm it before the job starts. Fences within standard residential height limits often don’t require a permit, but taller runs or those near easements can. HOA approval is a separate step if you’re in one. We tell you what applies to your property in the estimate.
Yes, in most cases. Post-hole installation is localized, and we protect the lawn around each hole. If an old fence is coming out, disposal is included and the old line gets cleaned up. Large grade changes are the main thing that expands the footprint.
Residential aluminum fencing typically runs $4,000 – $10,000 in Pico Rivera. Height, footage, gate count, picket spacing, and finish are the main drivers. Call (888) 255-8179 for an exact quote – estimates are free.
Our workmanship is backed by the 730-Day Done Right Promise for two years. If something isn’t done right, we make it right. The fence panels and posts also carry the material manufacturer’s own finish warranty, which we’ll walk you through on the estimate.
Get a Free Aluminum Fence Estimate in Pico Rivera
Call (888) 255-8179 to schedule a free on-site estimate for an aluminum fence in Pico Rivera. You’ll get a real person on the phone, a walk of your property line, and a written line-item quote with the price you’ll pay. From foundation to finish line, the whole job stays in one set of hands, backed in writing. Estimates are free and there’s no pressure to book on the spot.
Written by the team at Groundwork Construction Co.












