







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in Artesia, CA: What It Takes and What It Costs
Backsplash, Tile & Flooring work in Artesia usually runs $14,000 – $45,000 for a full kitchen scope, or $800 – $2,500 if you’re only replacing a backsplash. A tile backsplash alone is a two- to three-day job; adding floor tile through a kitchen and adjacent rooms stretches it to one to two weeks depending on square footage and how much prep the old surface needs. Call (888) 255-8179 for a free on-site estimate before you commit to a layout.
How We Run a Tile Job From Tear-Out to Grout

Every job follows the same five stages. What changes is how much demo we find underneath.
Stage 1: Walkthrough and substrate check (day 1, about an hour)
We pull a cabinet drawer, check the wall behind the range, and tap the floor for hollow spots. In Artesia, this is also where we find out whether an old enclosed patio or a previous addition left us with a level subfloor or a slope that needs correcting. You decide the tile layout and grout color at this visit, not later.
Stage 2: Protection and tear-out (days 1 – 2)
We mask cabinets, countertops, and appliances before a single tile comes up. Backsplash demo is fast, usually a few hours. Floor tear-out is where the schedule moves: thinset over a slab comes up cleanly, but tile over old vinyl or plywood takes longer and sometimes reveals water damage around the sink or dishwasher.
Stage 3: Prep and waterproofing (day 2 – 3)
This is the stage nobody sees and the one that decides whether the job lasts. We level low spots, prime, and set a waterproof membrane behind wet-area backsplash and across floor transitions. You approve any substrate repair before we tile over it, so there’s no surprise line item mid-job.
Stage 4: Setting tile (days 3 – 6)
Layout gets marked first so cuts land at the edges, not in the middle of the visible wall. Large-format floor tile runs faster than a mosaic; a herringbone backsplash takes roughly twice the labor of a straight stack. Grout goes in 24 hours after the last tile is set.
Stage 5: Grout, seal, and walkthrough (day 6 – 7)
We seal grout, reinstall outlet covers and appliances, and walk the job with you under the 730-Day Done Right Promise. If a tile sounds hollow or a grout line isn’t right, it gets fixed before we call the job closed.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Most homeowners spend their decision time on four things. Here’s the honest trade-off on each.
- Backsplash material: Ceramic is the value pick and forgiving on older walls. Porcelain holds up better in a working kitchen. Natural stone and large-format slab look the best but cost more and need sealing. Glass reads bright and modern but shows every bit of thinset behind it, so the prep has to be right.
- Floor tile: Porcelain is the default for durability and price. Luxury vinyl plank is cheaper and warmer underfoot but won’t last as long in a busy kitchen. Large-format tile (24×24 and up) cuts grout lines but demands a flatter floor, which means more prep in older homes.
- Grout and layout: Epoxy grout resists staining and doesn’t need resealing; cement grout is cheaper and easier to touch up later. Straight stack is the fastest install, offset and herringbone cost more in labor.
- Trim and transitions: Schluter-style metal edging, bullnose tile, or wood transitions at doorways. This is a small line item that makes the difference between a finished job and one that looks pieced together.
You pick the materials; we’ll tell you which ones hold up in a kitchen that actually gets used. Brand partners like Quikrete and Oldcastle cover the setting and substrate side, and we’ll match you with a tile line that fits the budget you set.
What Backsplash, Tile & Flooring Costs in Artesia, CA

Expect $14,000 – $45,000 for a full kitchen tile and flooring package, $800 – $2,500 for a backsplash-only replacement, and $4,000 – $13,000 for tile flooring through a kitchen and adjacent rooms. Five things push a job toward the low or high end:
- Square footage and layout complexity: A galley kitchen with a straight-run backsplash sits at the bottom. An L-shape with a peninsula, an island, and multiple cuts pushes toward the top.
- Substrate condition: A clean, level surface means no repair line. Cracked slab, old vinyl adhesive, or a soft spot near the sink adds $1,000 – $3,000 in prep.
- Material grade: Ceramic to porcelain to stone is a real spread. Large-format and slab tile also carry more waste and more labor.
- Moving plumbing or electrical: Relocating an outlet for a new backsplash pattern or moving a gas line for a range shift adds cost and, in some cases, requires a permit.
- Permit scope: A cosmetic backsplash swap doesn’t need one. Structural, plumbing, or electrical changes do, and that pulls in plan check.
Every written estimate breaks out demo, prep, materials, setting, grout, and disposal as separate line items. We don’t quote a lump sum and hope. What’s not included: the tile itself if you’re sourcing it independently, and any structural repair we can’t see until demo starts (we’ll flag it and get your approval before proceeding).
See the difference
Before
After
Before
After
Before
AfterWhat Artesia Homes Specifically Do to This Job
Artesia’s 1950s – 1960s single-story tract homes were built fast on small parcels, and a good number have had an addition or an enclosed patio added later, sometimes without permits. That matters for tile work because a backsplash or floor job lives and dies on the substrate, and in these homes the substrate is often not what the last remodeler left it as. We’ve opened walls in the 90701 tracts to find original drywall behind a second layer of tile, and floors that were shimmed over a slab rather than leveled. City permitting here runs strict plan-check reviews, so if the job touches plumbing or electrical, we build in the inspection time rather than promising a cosmetic-only schedule and then discovering otherwise. The upside of the older stock is that the bones are usually solid. The catch is that a contractor who hasn’t worked in Artesia’s retrofit reality will underbid the prep and then try to change the number mid-job.
If your tile and flooring work is part of a full Kitchen Remodeling in Artesia project, we sequence the tile phase against cabinets and countertops so the schedule holds. Our Kitchen Remodeling service covers the wider scope, and we also handle Vanities, Tile & Fixtures in Artesia and Tub-to-Shower Conversion in Artesia when homeowners are working through more than one room. We cover the full Artesia footprint, ZIP codes 90701 and 90702 included.
Serving Artesia, CA – Our Local Coverage Area
We serve Artesia and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in Artesia

A backsplash alone is two to three days. Kitchen plus adjacent floor tile runs seven to ten working days, and longer if we find substrate damage during demo. The schedule assumes you’ve picked tile and grout before day one; material lead times are the most common cause of delay. Call (888) 255-8179 for a timeline based on your actual square footage.
No permit is required for a cosmetic backsplash or floor tile replacement. You do need one if the job involves relocating plumbing, adding electrical outlets, or moving structural elements. Artesia’s plan-check reviews are strict, so we confirm permit scope during the walkthrough and handle the filing if it’s needed. Call for a free estimate and we’ll tell you upfront whether your job is permit-eligible.
Yes, most backsplash jobs don’t require touching plumbing or electrical. Outlet plates come off, the tile goes around them, and the covers go back on. If you want to add an outlet or relocate one for a new layout, that’s a small addition and we’ll price it as a separate line item. The price range stays in the $800 – $2,500 band on a non-structural backsplash.
The gap is almost always the prep line. A cheap bid frequently omits substrate repair, waterproofing, and disposal, then surfaces those costs once demo reveals the actual condition. Our written estimates list demo, prep, materials, setting, and disposal separately, so you can compare apples to apples. Call (888) 255-8179 and we’ll walk you through the line items before you sign anything.
Every job we complete is covered by the 730-Day Done Right Promise: if a tile or grout issue shows up, we come back and fix it. That covers workmanship, not wear from a dropped pan or a homeowner-installed fixture. If your tile or flooring job is part of a larger full kitchen renovation with us, the same promise applies across the whole scope.
Get a Free Estimate on Backsplash, Tile & Flooring in Artesia
We’ll walk your kitchen and floor, measure square footage, check substrate, and hand you a written line-item estimate with the exact price we’ll hold to. No obligation, no surprise line items. Call (888) 255-8179 and a live person answers, day or night. We’ll ask about your tile choice, your kitchen square footage, and whether the job touches plumbing or electrical, then book the on-site estimate at a time that works for you.
Written by the team at Groundwork Construction Co.












